Marine refrigeration repair is a process that can be difficult, but necessary, for keeping a boat or ship properly cooled. In order to correct marine refrigeration problems, the technician must first diagnose the issue. This may involve checking the compressor, charge air cooler, condenser fan motor and controls, and evaporator fan motors. If you're looking to repair your marine refrigeration you may browse this website https://yachtaidmarine.com/.
Image Source: Google
What are the Different Types of Marine Refrigeration?
There are basically three types of marine refrigeration systems: absorption, evaporative, and electronic. Absorption refrigeration is the oldest type and uses a pump to move cold water from one container to another. The most common type of absorption refrigerator is the fluid-cooled system. Evaporative refrigeration uses a vapor compression cycle to cool liquids or gases. The most common evaporative refrigerator is the air-cooled system.
Electronic marine refrigeration uses either microprocessor control or electric-powered fans to deliver chilled air or liquid coolant to an enclosed space. The most common electronic marine refrigerator is the compressor-driven unit.
How Marine Refrigeration Repair Works
The function of marine refrigeration is to maintain the temperature of a vessel's air, water, and food. Marine refrigeration systems use a number of different technologies to achieve this goal. Mechanical refrigeration relies on the use of an external compressor to push air through coils or fans inside a unit that will cool the air and send it into the vessel's ambient environment.
Photoelectric cooling uses light energy to create cold spots within a unit by reflecting off surfaces such as glass or metal. These units are typically smaller than mechanical refrigeration systems and are used in places where space is at a premium, such as on boats or aircraft carriers.
The Different Parts of a Marine Refrigeration System
In a marine refrigeration system, the different parts work together to keep the vessel cool. The refrigerant is circulated through the system to cool the interior of the vessel. The evaporator coils heat the refrigerant and send it into the condenser coils, where it's cooled and released as a liquid.